| Customization: | Available |
|---|---|
| After-sales Service: | Engineers to Assist Remote Installation and Use. |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
High Performance Crushing Machine for Plastic Injection Molding Recycling System
| Model | TGM-2823T | TGM-2823S | TGM-2823B | TGM-2829T | TGM-2829S | TGM-2829B | TGM-2842T | TGM-2842S | TGM-2842B | |
| Crushing Chamber Size | MM | 280 x 235 | 280x290 | 280*420 | ||||||
| Crushing Ability (PP) | KG/HR | 50-100 | 70-150 | 100-200 | ||||||
| Motor Power | HP | 2 | 3 | 5 | ||||||
| Rotate Speed | R/MIN | 140 | ||||||||
| Blade Type | Claw Blade + Screen | |||||||||
| Q'ty of Rotary Blades | PCS | 24 | 30 | 45 | ||||||
| Screen Size | MM | Φ6 | ||||||||
| Total Power | KW | 1.5 | 2.2 | 3.7 | ||||||
| Crushing Recycle Type | Tank | Suction | Blowing | Tank | Suction | Blowing | Tank | Suction | Blowing | |
| Machine Dimension (L x W x H) | L (mm) | 800 | 900 | 1000 | ||||||
| W (mm) | 500 | 500 | 500 | |||||||
| H (mm) | 1100 | 1200 | 1200 | |||||||
| Weight(Kg) | 150 | 160 | 200 | |||||||
1. Feeding hopper employs double layers of stainless steel with superior sound- proof, durable structure & excellent appearance.
2. Easy disassembly design-feeding hopper, cutters and screener easily & fast dismantle for cleaning.
3. Optimized structure of machine with small footprint, the bottom is equipped with casters, easy to move.
4. Middle speed at 140~300 rpm, power saving, less noise.
5. Blades are made of SKD-11(option) with long service life,multistep arrangement of blade enhance cutting capacity & improve crushing efficiency.
6. Various spec. of aperture screen can meet the needs of various products, mobile screen disassembly is convenient, easy to clean and change color.
7. The safety protection device is completed, the performance is stable and reliable, the upper and lower box and the access port are set up the limiting switch, after opening the equipment is in the state of power-off, to ensure the safety of the operator.
It is suitable to be placed beside IMM and robot with the conveyor belt to crush runners and a small amount of detective products. In addition, the regrind material can also be matched with 30 sec instant recycling system, the blower will send them to the cyclone dust collector, the powder isolation will be collected to the dust bag, the crushed particle material is with the virgin material in the hopper dryer, according to the two proportional valve mixed into IMM to use.
1. Cyclone Dust Collector: It can effectively sperate dust.
2. Positive Pressure Blower ( Blower for Conveying Material): Automatic feeding material, improve efficiency.
3. Screen: Screen the size of crushed particles.
4. Material Storage Box (Stainless Steel Suction Port Type of Material Storage Box)
5. Material Storage Tank: Storage Material
6. All Kinds of Blades: Screen the size of crushed particles.
7. 30 sec Instant Recycling System including blower conveying Device (Positive Pressure Blower) & Cyclone Dust Collector: to keep regrind material free from affecting the quality by humidification or oxidation.
8. Recycling System (Standard Type): The feeding blower is used to send the crushed material to the cyclone dust collector. The cyclone dust collector separates the crushed material from the air flow, so that the regrind material falls into the storage box or filter cloth bag, and the regrind material is recycled.
9. Dust Separator Recycling System (Dust Removing Type): The particles in the crushed material can be separated from the dust, and the particles can be recycled directly to avoid waste. The dust is collected into the filter bag, which can keep the working environment clean.
10. Full-Material Alarm Device: Install the material level motor. When the crushing material is full to the material level motor, the circuit will be disconnected through the sensor, the granulator will stop running, and the alarm will remind the customer to deal with it.
Dongguan Tongyi Plastic Machinery Manufacturing Co.,Ltd.(abbr. Tongyi) was found in 2005, Tongyi offers variety of products which can meet your multifarious demands. We adhere to the management principles of "quality first, customer first and credit-based" since the establishment of the company and always do our best to satisfy potential needs of our customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with anirresistible force.
Q: Are you a manufacturer?
A: Yes, we have seventeen years experience in equipment manufacturing.
Q: Do you support OEM?
A: Yes, we have our own brand, and also support ODM, OEM.
Q: How about your warranty?
A: All of our products for one years warranty.
Q: How about your average lead time?
A: Peak Season Lead Time: within 15 workdays. Off Season Lead Time: within 15 workdays.
Q: What's your payment term?
A: The payment term is 70% prepayment, 30% balance before delivery.
){kind=link}