| Customization: | Available |
|---|---|
| Customized: | Non-Customized |
| Certification: | ISO9001, CE |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
TTW-1209D Water Type Dual Mold Temperature Controllers
TTW series water type mold temperature controllers have standard type, high temperature type, dual temperature type, mainly control the mold temperature to be kept in a constant temperature state. It uses water as heating media to realize heat exchange by direct & indirect cooling. The standard type adopts direct cooling for the mold return water through cooler; The high temperature type adopts indirect cooling through cooler, then pump pressure via heater and then sent to the mold, to achieve the requirements of heating and constant temperature. Water type has its superiorities with high efficient heat transmission, less pollution, water resource easy to be attained with low cost
| Model Content |
TTW-1206D | TTW-1209D | TTW-1212D | TTW-1218D | TTW-1224D | TTW-1236D | TTW-1624D | TTW-1636D | TTW-1648D | |
| Medium | Clean Water | |||||||||
| Maximum Temperature | ºC | 120 | 160 | |||||||
| Minimum Temprature | ºC | Cooling Water Temperature +5~30ºC | ||||||||
| Cooling Method | Direct | |||||||||
| Heater Power | KW | 6*2 | 9*2 | 12*2 | 9*4 | 12*4 | 12*6 | 12*4 | 12*6 | 12*8 |
| Pump Power | KW | 0.37*2 | 0.75*2 | 0.75*2 | 1.5*2 | 1.5*2 | 2.2*2 | 1.5*2 | 2.2*2 | 3*2 |
| Pump Max. Flow | L/MIN | 42 | 60 | 140 | 235 | 235 | 300 | 140 | 200 | 260 |
| Max. Pressure | MPA | 0.28 | 0.38 | 0.23 | 0.24 | 0.24 | 0.3 | 0.35 | 0.35 | 0.35 |
| Temperature Probe | K Type Probe Thermocouple | |||||||||
| Water Outlet Pipe Dia | MM | 15 | 15 | 15 | 15 | 15 | 15 | 15 | 15 | 15 |
| Medium Inlet / Outlet Type | 4 In 4 Out x 2 | 1 In 1 Out x 2 | ||||||||
| Medium Inlet / Out let Diameter | INCH | 3/8 | 3/8 | 3/8 | 1 | 1 | 1.5 | 1 | 1.5 | 2 |
Machine Dimension |
L(MM) | 720 | 720 | 720 | 950 | 950 | 1100 | 800 | 950 | 1050 |
| W(MM) | 530 | 530 | 550 | 550 | 550 | 650 | 900 | 1000 | 1100 | |
| H(MM) | 785 | 800 | 800 | 1000 | 1000 | 1000 | 750 | 750 | 750 | |
1. To adopt microcomputer dual P.I.D. automatic calculation controller, can be two-way control (heating and cooling), rapid heating and cooling speed lead temperature to be kept precisely and stably with accuracy up to +0.1ºC.
2. Weekly timing automatic switch on and off, can save electricity and effective arrangement of work to improve efficiency. In addition, it also can support Chinese/English switch.
3. Unique heating design is suitable to different temperature control application with excellent & distinct power saving.
4. Electric control box and machine body are isolated to acquire good effects on heat insulation, can extend the service life of electric component.
5. Safety protection and fault indication system includes: main power non-fuse braker; pump reversal and overload protection, protection against water shortage and overheating protection, easy operation and maintenance.
6. Imported hi-class parts with long service life to save maintenance cost.
7. 304 stainless steel integrated pipelines with less pipe resistance and even heating for long service life.
8. Equipped with low liquid level & water inlet low pressure protection, system high pressure protection, automatic water refilling and air exhausting function.
9. High efficiency high temperature pump to realize high efficiency heat exchange.
10. Forced cooling can quickly change mold to save time.
11. Fast heating and cooling time, stable temperature.
12. It uses water as heating media, standard type can heat up to 120 oC; high temperature type can heat up to 160oC.
13. Standard equipped with RS485 communication interface that can realize automatic centralized monitoring.
1. Magnetic Pump
2. Contactless Solid State Relay for Controlling Heat
3. Add Filter to Cold Water Inlet
4. Electrical Leakage Protection Switch
5. Abnormal Voltage Protection Switch
6. Clean Mold Function
Mainly used in mold heating and constant temperature. In addition, it can also be applied to other fields of heating and constant temperature, such as die casting (high temperature type) & printing industry (big power of mold temperature controller) etc.
Dongguan Tongyi Plastic Machinery Manufacturing Co.,Ltd.(abbr. Tongyi) was found in 2005, Tongyi offers variety of products which can meet your multifarious demands. We adhere to the management principles of "quality first, customer first and credit-based" since the establishment of the company and always do our best to satisfy potential needs of our customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with anirresistible force.
Q: Are you a manufacturer?
A: Yes, we have seventeen years experience in equipment manufacturing.
Q: Do you support OEM?
A: Yes, we have our own brand, and also support ODM, OEM.
Q: How about your warranty?
A: All of our products for one years warranty.
Q: How about your average lead time?
A: Peak Season Lead Time: within 15 workdays. Off Season Lead Time: within 15 workdays.
Q: What's your payment term?
A: The payment term is 70% prepayment, 30% balance before delivery.
){kind=link}