| Customization: | Available |
|---|---|
| After-sales Service: | Engineers to Assist Remote Installation and Use. |
| Structure: | Vertical |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
High Performance Dehumidifying Dryer for Injection Molding Machine with Dehumidifier
| Model | TCDE-25 | TCDE-50 | TCDE-75 | TCDE-100 | TCDE-150 | TCDE-200 | TCDE-300 | TCDE-400 | TCDE-500 | TCDE-600 | |
| Hopper Capacity | KG | 25 | 50 | 75 | 100 | 150 | 200 | 300 | 400 | 500 | 600 |
| Drying Blower Power ( 50 / 60 HZ) |
KW | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.7 | 0.7 | 1.3 | 1.3 |
| KW | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.83 | 0.83 | 1.5 | 1.5 | |
| Drying Heater Power ( 50 / 60 HZ) |
KW | 3.8 | 3.8 | 3.8 | 7.4 | 7.4 | 11 | 16 | 18 | 18 | 18 |
| KW | 3.8 | 3.8 | 3.8 | 7.4 | 7.4 | 11 | 16 | 18 | 18 | 18 | |
| Drying Temp | ºC | 180 | 180 | 180 | 180 | 180 | 180 | 180 | 180 | 180 | 180 |
| Dehumidifying Air Capacity | M3 / H | 60 | 90 | 90 | 120 | 150 | 200 | 300 | 400 | 500 | 600 |
| Conveying Blower Power ( 50 / 60 HZ) |
KW | 0.7 | 0.85 | 1.3 | 1.6 | 1.6 | 2.2 | 2.2 | 2.2 | 2.2 | 2.2 |
| KW | 0.83 | 0.95 | 1.5 | 2.05 | 2.05 | 2.55 | 2.55 | 2.55 | 2.55 | 2.55 | |
| Photoelectrical Hopper Receiver | L | 3 | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 | 12 | 12 | 12 | 24 |
| Vacuum Hopper Receiver | L | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 | 12 | 12 | 12 | 24 |
| Power Supply | 3P 380V 50HZ | ||||||||||
| Control Voltage | 1P 220V 50HZ | ||||||||||
| Total Power ( 50 / 60 HZ) | KW | 4.9 | 5.05 | 5.5 | 9.4 | 9.4 | 13.6 | 18.9 | 20.9 | 21.5 | 21.5 |
| KW | 5.13 | 5.25 | 5.8 | 9.95 | 9.95 | 14.05 | 19.38 | 21.38 | 22.05 | 22.05 | |
| Dimensions | L(MM) | 880 | 880 | 880 | 1270 | 1300 | 1300 | 1300 | 1700 | 1700 | 2000 |
| W(MM) | 880 | 880 | 880 | 950 | 1210 | 1210 | 1210 | 1220 | 1220 | 1350 | |
| H(MM) | 1650 | 1650 | 1800 | 1840 | 1900 | 2100 | 2200 | 2500 | 2560 | 2850 | |
| Weight | KG | 180 | 180 | 185 | 280 | 295 | 300 | 310 | 350 | 400 | 440 |
1. Microcomputer double-group P.I.D temperature control table, touch type internal storage, automatic calculation temperature controller, the actual temperature difference can be controlled within ± 0.1 degrees, to ensure the stability of dew point.
2. To integrate the function of dehumidifying, drying and two - stage conveying into single unit. Three-stage conveying function is optional.
3. Intelligent pre-heating setting, equipped with weekly timer, to realize the machine operation automation.
4. The dehumidification system adopts cooler structure to ensure lower return air temperature and dew point for improving the quality of finished products greatly thanks to supply stable dehumidified at -40ºC dew-point, controlled temperature precisely.
5. The structure of cooler adopts stainless steel easy disassembly design, for dehumidifying oily plastic resin, easier to clean.
6. Double - wall insulated hopper dryers feature down-blowing pipe design to avoid heat dispersion for improving drying efficiency.Conveying system is made of stainless steel to eliminate material contamination.
7. Closed-loop circulation for dehumidified air & feeding system to avoid the possibility of moisture regain for absorbing outside air during material conveying.
8. Feeding system is equipped with shut -off valve to ensure no remaining material in material tube.
9. Using imported superb parts which enhance function and extend service life for saving maintenance cost.
10. Powder coated frame of machine with exquisite appearance. Compact construction; small footprint to save space; move conveniently for any machine use. User-friendly design for convenient maintenance.
11. Perfect safety protection, fault indication and intelligent alarm system with multiple protection device. Reduce accidents caused by human or mechanical failure.
12. One to two dehumidifying & drying combination equips with 2 drying hoppers, the drying temperature of single hopper can be individually controlled. It mainly applied to two color component IMM which can process dehumidifying & drying to two different drying materials.
13. Optical-class models use mirror polished treatment on the material contact surface to avoid material contamination and collocate conveying. system with closed-loop in order to avoid the possibility of moisture regain for absorbing outside air during material conveying.
14. Standard equipped with RS485 communification interface that can realize automatic centralized monitoring.
1. Dew-Point Indicators (Easy to monitor dew-point at any time)
2. Contactless Solid State Relay
3. Human-Machine Interface: Optional PLC Control and LCD Touch Human-Machine Interface (Centralized and convenient operation, the machine can be controlled to run automatically)
4. Cyclone Separator
TCDE series - energy saving type of 3 in 1 compact dehumidifying dryer with the device of compact structure, especially suitable for high degree of automation, compact space places. Apply to plastic products of the precision requirements, scope covers medicine, lens and LCD optical products, can also be applied to the connector, precision gears, mobile communications, digital cameras and strict product size precision injection using engineering plastic products such as production, makes the raw material moisture content after moisture drying is low and stable, can meet the strict technical and quality requirements.
Tongyi originated from Taiwan, in order to meet the needs of mainland customers, in April 1999, the company set up an assembly plant in Dongguan of the Pearl River Delta, and began to sell some of its products to the Pearl River Delta market. Adhering to the purpose of "excellence, quality first", the company is committed to the research and development of intelligent automation equipment innovation, intelligent manufacturing and the whole plant planning, to provide intelligent factory overall solutions, is a professional engaged in intelligent automation equipment, design, research and development, production, sales and service in one of the intelligent manufacturing high-tech enterprises.
In order to meet the needs of customers in the YangtzeRiver Delta, in August 2011, we established an assembly plant in Suzhou of Yangtze River Delta. With abundant manufacturing experience and high-quality service, we provide customers with intelligent manufacturing automation equipment for the whole plant. With the rising costs in mainland China and the relocation of some manufacturing plants, adhering to the concept of always serving customers, we established a company in Hanoi, Vietnam, Southeast Asia, in May 2017, to provide overseas customers with the whole plant planning, technical support, talent training and plant construction and production needs.
Tongyi has always been customer-centric, with talent and technical advantages to assist customers from stand-alone automation system, system automation to intelligent automation production development needs. In addition, it has 6 production bases at domestic and abroad, including 2 in South China, 1 in Central China, 2 in East China, and overseas Vietnam, and has set up a number of holding companies in the country, many service bases to provide customers at domestic and abroad with better and more immediate service, fast processing to meet customer needs, and create value for customers.
Q: Are you a manufacturer?
A: Yes, we have seventeen years experience in equipment manufacturing.
){kind=link}