| Customization: | Available |
|---|---|
| After-sales Service: | Engineers to Assist Remote Installation and Use. |
| Structure: | Vertical |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
High Efficiency Honeycomb Rotor Dehumidifier for Plastic Granule
| Model | TDH-60 | TDH-90 | TDH-120 | TDH-150 | TDH-200 | TDH-300 | TDH-400 | TDH-500 | TDH-700 | TDH-1000 | |
| Dehumidifying Air Capacity | M3 / H | 60 | 90 | 120 | 150 | 200 | 300 | 400 | 500 | 700 | 1000 |
| Dehumidifying Blower Power ( 50 / 60 HZ) | KW | 0.7 | 0.7 | 1.3 | 1.3 | 2.2 | 3 | 4 | 5.5 | 5.5 | 7.7 |
| KW | 0.83 | 0.83 | 1.5 | 1.5 | 2.55 | 3.45 | 4.6 | 6.3 | 6.3 | 8.6 | |
| Regeneration Blower ( 50 / 60 HZ) | KW | 0.4 | 0.4 | 0.4 | 0.4 | 0.7 | 0.7 | 0.7 | 1.3 | 1.6 | 2.2 |
| KW | 0.5 | 0.5 | 0.5 | 0.5 | 0.83 | 0.83 | 0.83 | 1.5 | 2.05 | 2.55 | |
| Regeneration Heater Power ( 50 / 60 HZ) | KW | 3.8 | 3.8 | 5.4 | 5.4 | 7.4 | 7.4 | 7.4 | 11 | 16 | 18 |
| KW | 3.8 | 3.8 | 5.4 | 5.4 | 7.4 | 7.4 | 7.4 | 11 | 16 | 18 | |
| Pipe Diameter | INCH | 1.5'' | 1.5'' | 2'' | 2'' | 2.5'' | 2.5'' | 2.5'' | 3'' | 3.5'' | 4'' |
| Cooling Water Flow | LPM | 10 | 10 | 15 | 20 | 30 | 50 | 60 | 70 | 100 | 150 |
| Cooling Water Pipes Size | INCH | ½'' | ½'' | ¾'' | ¾'' | ¾'' | 1'' | 1'' | 1¼'' | 1¼'' | 1½'' |
| Rotor Motor Power | W | 15 | 15 | 15 | 15 | 15 | 15 | 15 | 40 | 40 | 90 |
| Power Supply | V | 380VAC 3P/PE 50Hz | |||||||||
| Control Voltage | V | 220VAC 1P/PE 50Hz | |||||||||
| Total Power ( 50 / 60 HZ) | KW | 4.9 | 4.9 | 7.1 | 7.1 | 10.3 | 11.1 | 12.1 | 17.8 | 23.1 | 27.7 |
| KW | 5.13 | 5.13 | 7.4 | 7.4 | 10.78 | 11.68 | 12.83 | 18.8 | 24.35 | 29.15 | |
| Dimensions | L(MM) | 850 | 850 | 900 | 900 | 1060 | 1070 | 1070 | 1320 | 1320 | 1650 |
| W(MM) | 650 | 650 | 670 | 670 | 670 | 770 | 770 | 1100 | 1100 | 1320 | |
| H(MM) | 1480 | 1450 | 1500 | 1500 | 1500 | 1760 | 1760 | 1850 | 1850 | 1980 | |
| Weight | KG | 120 | 130 | 180 | 200 | 245 | 280 | 360 | 480 | 650 | 735 |
1. Equipped with microprocessor, can accurately control regenerative temperature , the actual temperature difference can be controlled within ±0.1°to ensure dew-point stable.
2. The imported honeycomb rotor can provide dry air at dew-point-32ºC~-40ºC during continuous load operation, and even below-40ºC if it is equipped with chilled water. The dry dew point is smooth and the temperature control is accurate and stable.
3. To adopt silica gel absorption honeycomb with low regenerative temperature at 150ºC which can save more power if compare with molecular sieve structure with regenerative temperature above 200ºC.
4. Return air filter is installed inside to ensure no powder & dust contamination to the honeycomb rotor.
5. The dehumidification system adopts cooler structure to ensure lower return air temperature and dew point for improving the quality of finished products greatly thanks to supply stable dehumidified at -40ºC dew-point, controlled temperature precisely.
6. The structure of cooler adopts stainless steel easy disassembly design, for dehumidifying oily plastic resin, easier to clean.
7. Using imported superb parts which enhance function and extend service life for saving maintenance cost.
8. Powder coated frame of machine with exquisite appearance. Compact construction; small footprint to save space; move conveniently for any machine use. User-friendly design for convenient maintenance.
9. Perfect safety protection, fault indication and intelligent alarm system with multiple protection device. Reduce accidents caused by human or mechanical failure.
1. Dew-Point Indicators (Easy to Monitor Dew-point at Any Time)
2. Contactless Solid State Relay
3. Oil Removal Filter (Used When Drying Raw Materials Containing Plasticizer)
4. Cyclone Separator
5. Hopper Dryers
6. Heat Resistant Air Pipe and Piping Parts
7. Floor Stand Type Cyclone Dust Collector
8. Molecular Sieve Honeycomb Rotor
Honeycomb Rotor Dehumidifier mainly used in all fields of drying treatment. Especially for strong hygroscopic plastics such as PET, PBT, PA, PC and so on need ultra-low dew point -40ºC for drying equipment.
Tongyi originated from Taiwan, in order to meet the needs of mainland customers, in April 1999, the company set up an assembly plant in Dongguan of the Pearl River Delta, and began to sell some of its products to the Pearl River Delta market. Adhering to the purpose of "excellence, quality first", the company is committed to the research and development of intelligent automation equipment innovation, intelligent manufacturing and the whole plant planning, to provide intelligent factory overall solutions, is a professional engaged in intelligent automation equipment, design, research and development, production, sales and service in one of the intelligent manufacturing high-tech enterprises.
In order to meet the needs of customers in the YangtzeRiver Delta, in August 2011, we established an assembly plant in Suzhou of Yangtze River Delta. With abundant manufacturing experience and high-quality service, we provide customers with intelligent manufacturing automation equipment for the whole plant. With the rising costs in mainland China and the relocation of some manufacturing plants, adhering to the concept of always serving customers, we established a company in Hanoi, Vietnam, Southeast Asia, in May 2017, to provide overseas customers with the whole plant planning, technical support, talent training and plant construction and production needs.
Tongyi has always been customer-centric, with talent and technical advantages to assist customers from stand-alone automation system, system automation to intelligent automation production development needs. In addition, it has 6 production bases at domestic and abroad, including 2 in South China, 1 in Central China, 2 in East China, and overseas Vietnam, and has set up a number of holding companies in the country, many service bases to provide customers at domestic and abroad with better and more immediate service, fast processing to meet customer needs, and create value for customers.
Q: Are you a manufacturer?
A: Yes, we have seventeen years experience in equipment manufacturing.
){kind=link}