| Customization: | Available |
|---|---|
| After-sales Service: | Engineers to Assist Remote Installation and Use. |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Plastic Shredder Machine for Waste Bucket/Bottle/Barrel
| Model |
TS-06028S | TS-08040S | TS-10045S | TS-12045S | TS-15050S | TS-16050S | |
| Main Shaft Length | MM | 600 | 800 | 1000 | 1200 | 1500 | 1600 |
| Main Shaft Diameter | MM | 280 | 400 | 450 | 450 | 500 | 500 |
| Main Shaft Speed | RPM | 78 | 78 | 78 | 78 | 72 | 72 |
| Ram Travel | MM | 600 | 800 | 1000 | 1200 | 1400 | 1400 |
| Rotor Blades | PCS | 30 | 38 | 63 | 81 | 109 | 115 |
| Fixed Blades | PCS | 2 | 2 | 3 | 4 | 4 | 4 |
| Motor Power | KW | 22 | 37 | 55/75 | 75/90 | 110/132 | 75*2 |
| Hydraulic Power | KW | 2.2 | 3 | 5.5 | 5.5 | 11 | 11 |
| Screen Mesh Diameter | MM | 30-80 | 30-80 | 30-120 | 30-120 | 30-120 | 30-120 |
| Cutting Chamber Dimension | MM | 600*600 | 800*800 | 1000*1000 | 1200*1250 | 1400*1500 | 1600*1400 |
| Overall Dimension | L(MM) | 2000 | 2540 | 2950 | 3650 | 4060 | 4060 |
| W(MM) | 1400 | 1750 | 2000 | 2300 | 2750 | 2850 | |
| H(MM) | 1900 | 2650 | 2850 | 2860 | 3300 | 3300 | |
| Weight | KGS | 2100 | 5000 | 7000 | 8000 | 10000 | 12000 |
1. Selection of high quality alloy steel, the same industry general selection of ordinary Q235 steel more. The main wear parts are heat treatment and wear-resistant treatment technology.
2. Large motor power, reasonable match with reducer, stable performance.
3. Hydraulic screen change system. Hydraulic screen mesh change function can realize rapid screen change, easy to replace the knife and cleaning, improve work efficiency.
4. When the machine is overloaded, the spindle automatically reverses to protect the equipment. With a key start-stop function, simple operation. Hydraulic pressure and cart speed can be adjusted directly in the hydraulic station, simple operation, reduce the requirements for workers.
5. Optimized shredding chamber structure design. The trolley suspension and guiderail are integrated on the side of the body, and the bottom of the chassis is flat to reduce the cost of wearing parts. Shredding room adopts inclined design, material shredding more easily, higher output.
6. The bearing seat is installed on the outside of the chassis, and the bearing and bearing seat are directly sealed by the sealing ring, effectively avoiding the crushing material into the bearing, so as to improve the service life of the bearing.
7. Customized spindle design. For different materials, different structure of the spindle. For example, for the W-shaped main shaft of soft materials such as film and ton bag, the tool holder is welded, which can effectively avoid materials entering the gap of the tool holder and corroding the tool bolt, resulting in difficult replacement in the later period. For hollow and block materials, wear-resistant welding is added to the main shaft to protect the it. At the same time, the weld is polished to ensure the consistency of the spindle and the tool clearance and ensure the shredding efficiency.
8. Emergency switch. Shredder front section equipped with emergency switch, safe and convenient.
9. Magnetic sensor. After opening the screen door, the whole machine will be automatically disconnected to protect the safety of workers when replacing the blade.
10. Customized Spindle Rotor
The spindle rotor adopts different design in accordance with different material. The rotor blade can be used symmetrically.
11. Hydraulic Screen Replacement
The hydraulic system could achieve fast screen replacement short-time maintenance through automatically opening and closing.
12. Main Shaft Rack
All shredders are equipped with E- type smooth rotors. The rotor blade and blade holder are fixed on the rotor by bolts. The hydraulic screen cradle allows for easy knife maintenance and screen replacement.
13. Outboard Bearing Housing
The bearing housing is installed outside the chamber, sealed by rubber ring to prevent the crushed material entering the bearing. Thus ensuring a longer service life.
Single shaft shredder is equipped with built-in pushing device. so that it has small footprint and increased internal space of the chamber. lt is an ideal shredding machine for large volume materials. It is suitable for injection molding machine head material, chemical blue bucket, trash can, pallet and other large volume bucket containers, film, blow molding industry waste, carpet, wood, kitchen and household garbage and other waste. We can also customize special models according to customers demand.
Dongguan Tongyi Plastic Machinery Manufacturing Co.,Ltd.(abbr. Tongyi) was found in 2005, Tongyi offers variety of products which can meet your multifarious demands. We adhere to the management principles of "quality first, customer first and credit-based" since the establishment of the company and always do our best to satisfy potential needs of our customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with anirresistible force.
Q: Are you a manufacturer?
A: Yes, we have seventeen years experience in equipment manufacturing.
Q: Do you support OEM?
A: Yes, we have our own brand, and also support ODM, OEM.
Q: How about your warranty?
A: All of our products for one years warranty.
Q: How about your average lead time?
A: Peak Season Lead Time: within 15 workdays. Off Season Lead Time: within 15 workdays.
Q: What's your payment term?
A: The payment term is 70% prepayment, 30% balance before delivery.
){kind=link}